Back up Any Hard Drive

How to Back up Any Hard Drive(4)

Warnings

1.Take special care to switch off the power before working within the PC case. Additionally, to avoid error, remove the power cord.

2.Data cable connectors are always tight, so try to avoid tugging the wiring when working them free. They need persistence and strong fingers.

3.The drive size needs to be at least as big as the old one.

4.Larger destination drives are OK but any extra capacity will not be recognised by your PC. Other commercial software products can allow use of the extra capacity.

5.A faster drive makes your PC go quicker, but browsers may seem slower with very large drives. The ideal drive for this is one that is very fast and no bigger than is needed.

6.Protect the hard drive. When connecting the new drive, notice that one side has open wiring. Above all, make sure that this side is not damaged. In addition, be certain that the body of the drive cannot contact the metal case or other circuitry. If possible, leave the drive in the box and foam packing that came with it, while it is cabled up. Otherwise, to insulate it, use a magazine, a paperback, or plastic bag between the drive and any flat surface.

the article source:http://www.wikihow.com/Back-up-Any-Hard-Drive