Clean the Inside of a Computer

How to Clean the Inside of a Computer(3)

Steps

10.clean up your work space. The initial run will churn up a lot of particulates. Depending on your workspace, you may need to get a small vacuum and clean the area around the computer. Do not use a vacuum on the inside of the computer. You might want to consider leaving your machine open while you do this. Airborne dust inside the computer will begin to settle and you can make your effort exceptionally productive if you make a second run.

11.Close your machine. After you've finished dusting, replace the side of your machine and any screws. Once the machine is tightly shut, return it to its usual spot and reattach the power cord and other cables. (You might consider cleaning this entire area to remove excess materials that can contribute to dust intake.) If you flipped the master power switch on the back of your machine off, be sure to turn it on again or your machine will not start.

Tips
1.Wearing a dust mask can save your a good deal of irritation and sneezing, especially if you have breathing or lung conditions.

2.Cleaning your machine outside can save you a lot of clean-up, IF you can ensure a stable and clean spot. An open garage and clean work table would be an excellent cleaning environment. However, be sure that there are no extraneous materials (wood chips or twigs) that can enter your machine. Particles such as this can cause major damage.

the article source:http://www.wikihow.com/Clean-the-Inside-of-a-Computer